Everything about Hudson Motor Car Company totally explained
The
Hudson Motor Car Company made Hudson and other brand
automobiles in
Detroit, Michigan, from 1909 to 1954. In 1954, Hudson merged with
Nash-Kelvinator Corporation to form
American Motors. The Hudson name was continued through the 1957 model year, after which it was dropped.
The name "Hudson" came from
J.L. Hudson, a Detroit department store entrepreneur and founder of
Hudson's department store, who provided the necessary capital and gave permission for the company to be named after him. A total of eight Detroit businessmen formed the company on
February 24 1909, to produce an automobile which would sell for less than
US$1,000. One of the chief "car men" and organizer of the company was Roy Chapin, Sr, a young executive who had worked with
Ransom E. Olds (Chapin's son, Roy Jr, would later be president of Hudson-Nash descendant American Motors Corp. in the 1960s). The company quickly started production with first car driven out of a small factory in Detroit on
July 3 1909. The new Hudson "Twenty" was one of the first low-priced cars on the American market and very successful with more than 4,000 were sold the first year. This was the best first year's production in the history of the automobile industry up to that time.
The company had a number of firsts for the auto industry, these included dual
brakes, the use of dashboard oil-pressure and generator warning lights, and the first balanced
crankshaft, which allowed the Hudson
straight-6 engine, dubbed the "Super Six" (1916), to work at a higher rotational speed while remaining smooth, developing more power for its size than lower-revving engines. Most Hudsons until 1957 had straight-6 engines. The dual brake system used a secondary mechanical system (parking brakes) which activated the rear brakes when the pedal travelled beyond the normal reach of the primary system; a mechanical emergency brake was also used. Hudsons also used an oil bath and cork clutch mechanism that proved to be as durable as it was smooth.
At its peak in 1929, 300,000 cars were produced in one year (Hudson and Essex combined), including contributions from Hudson's other factories in
Belgium and
England; a factory had been built in 1925 in
Brentford in
London.. Hudson was the third largest U.S. car maker that year, after
Ford Motor Company and
Chevrolet.
(External Link
)
Essex & Terraplane
In 1919 Hudson introduced the
Essex brand line of automobiles; the line was originally for budget minded buyers, designed to compete with
Ford and
Chevrolet, as opposed to the more up-scale Hudson line. The Essex found great success by offering one of the first affordable
sedans, and combined Hudson and Essex sales moved from seventh in the U.S. to third by 1925.
In 1932, Hudson began phasing out its Essex nameplate for the modern
Terraplane brand name. The new line was launched on
July 21 1932, with a promotional christening by
Amelia Earhart. For 1932 and 1933, the restyled cars were named Essex-Terraplane; from 1934 as Terraplane, until 1938 when the Terraplane was re-named the Hudson 112. Hudson also began assembling cars in Canada, contracting
Canada Top and Body to build the cars in their
Tilbury, Ontario, plant. In England Terraplanes built at the Brentford factory were still being advertised in 1938..
An optional accessory on some 1935-1938 Hudson and Terraplane models was a steering column-mounted electric gear pre-selector and electro-mechanical automatic shifting system, known as the
Electric Hand, manufactured by the
Bendix Corporation. This took the place of the floor-mounted shift lever, but required conventional clutch actions. Cars equipped with Electric Hand also carried a conventional shift lever in clips under the dash, which could be pulled out and put to use in case the Electric Hand should ever fail. Hudson was also noted for offering an optional vacuum-powered automatic clutch, starting in the early 1930s.
1936-1942
In 1936, Hudson revamped its cars, introducing a new "radial safety control" / "rhythmic ride" suspension which suspended the live front
axle from two steel bars, as well as from leaf springs. Doing this allowed the use of longer, softer
leaf springs ("rhythmic ride"), and prevented bumps and braking from moving the car off course. The 1936 Hudsons were also considerably larger inside than competitive cars - Hudson claimed a 145 cubic foot interior, comparing it to 121 feet in the "largest of other popular cars." (According to
United States Environmental Protection Agency (EPA) measurements, the cavernous
Chrysler LHS only reached 126 cubic feet.) With the optional bulging trunk lid, the Hudsons could store 21 cubic feet of luggage (the LHS, 19), though that might have been an optimistic measurement. The 1936 engines were powerful for the time, from to . The 1939 models joined other American cars in the use of a column-mounted gearshift lever. This freed front-seat passenger space and remained the industry standard through the 1960s, when "
bucket seats" came into vogue. For 1940 Hudson introduced independent front suspension and true center-point steering on all its models, a major advance in performance among cars in this price range. In 1942, perhaps in response to General Motors' Hydra-Matic automatic transmission, Hudson introduced its "Drive-Master" system. Drive-Master was a more sophisticated combination of the concepts used in the Electric Hand and the automatic clutch. At the touch of a button, Drive-Master offered the driver a choice of three modes of operation: (1) Ordinary, manual shifting and clutching; (2) Manual shifting with automatic clutching, and (3) Automatic shifting with automatic clutching. All this was accomplished by a large and very complicated mechanism located under the hood. They worked quite well, and in fully automatic mode served as a very good semi-automatic transmission. When coupled with an automatic overdrive, Drive-Master became known as Super-Matic. Drive-Master was offered by Hudson through the 1950 model year. In 1951, when GM made its
Hydra-Matic available to all other carmakers, Hudson replaced Drive-Master and Super-Matic with
Hydra-Matic.
As ordered by the Federal government, Hudson ceased auto production from 1942 until 1945 in order to manufacture war materiel during
World War II, including aircraft parts and naval engines, and anti-aircraft guns. The Hudson "Invader" engine powered many of the landing craft used on the
D-Day,
June 6 1944 invasion of Normandy.
1946 - 1954
In 1948 the company launched their "step-down" bodies, which lasted through the 1954
model year. The term step-down referred to Hudson's placement of the passenger compartment down inside the perimeter of the frame; riders stepped down into a floor that was surrounded by the perimeter of the car's frame. The result wasn't only a safer car, and greater passenger comfort as well, but, through a lower center of gravity, an extremely well-handling car. In time almost all automakers would embrace it as a means of building bodies. Automotive writer and authority
Richard Langworth has written glowingly of the early step-down models stating that "they're one of greatest" autos of the era in articles for Consumer Guide and Collectible Automobile.
Hudson's strong, light-weight bodies, combined with its high-torque six-cylinder engine technology made the company's 1951-1954
Hornet an
auto racing Champion, dominating
NASCAR in 1951, 1952, 1953, and 1954. Some NASCAR records set by Hudson in the 1950s (
for example consecutive wins in one racing season) still stand even today. Later, these cars met with some success in
drag racing, where their high
power-to-weight ratio worked to their advantage. Hudsons enjoyed success both in NHRA (National Hot Rod Assoc.) trials and local dirt track events well into the 1960s. (Today, Hudsons continue to set top-speed records in their class at the
Bonneville Salt Flats.)
Like many other smaller North American auto manufacturers, Hudson found it increasingly difficult to compete with the Big Three (
Ford,
GM and
Chrysler) during the 1950s. Those large companies could afford constant development and styling changes, so that their cars looked fresh every year, whereas the smaller manufacturers could only afford gradual change. Hudson's once innovative "step-down" unit body construction, while sturdy and innovative, also made restyling difficult and expensive. After the company's high-priced and unattractive (thus ill-fated) Jet compact car line failed to capture buyers in its second straight year, Hudson was "acquired" by Nash-Kelvinator (makers of
Nash and
Rambler automobiles in 1954.
1954-1957
On
January 14 1954, Hudson merged with
Nash-Kelvinator Corporation to become
American Motors. The Hudson factory in
Detroit,
Michigan was converted to military contract production at the end of the model year, and the remaining three years of Hudson production took place in
Kenosha, Wisconsin.
For 1955, both Hudson and Nash senior models were built on a common
automobile platform using styling themes by
Pinin Farina,
Edmund Anderson, and
Frank Spring. (Common-body shell production for competing makes of automobiles is a manufacturing technique used by the Big Three for decades.) Although the 1955 Hudson used the inner body shell of the Nash, the car incorporated a front cowl originally designed by Spring & the Hudson people to be put on the 1954 Step-Down platform. The 1955s also used the Hudson dashboard, "triple safe brakes" and Nash
Weather Eye heater with Harrison-supplied lower cost freon/compressor type
air conditioning.
Hudson dealers also sold Rambler and
Metropolitan models under the Hudson brand. When sold by Hudson dealers, both cars were identified as Hudson vehicles via hood/grille emblems and horn buttons. Hudson Ramblers also received "H" symbols on fuel filler caps (and, in 1956, also on
hubcaps). For 1957, Rambler and Metropolitan became makes in their own rights, and no longer were identified as Hudson or Nash.
For 1956, design of the senior Hudsons was given over to designer
Richard Arbib, which resulted in the "V-Line" styling motif, a combination of “V” motifs that carried Hudson’s triangular corporate logo theme. Sales fell below 1955 figures. For 1957, Hudson dropped the shorter-wheelbase Wasp line, selling only the Hornet Custom and Super, which featured a lowered profile and slightly updated styling.
With a wider front track than Nash used, Hudson was the better handling car, and was powered by the famed Hornet Six with the optional high-compression cylinder head and dual-
carburetor manifold ("Twin-H Power"). The Wasp used the L-head Jet Six engine and this model (in sedan version) was Hudson's top seller. For 1955, for the first time Hudson offered a V8 engine, a powerplant rated at and built for Hudson and Nash by
Packard. All cars with the Packard V8 also used Packard's
Ultramatic automatic transmission.
The last Hudson rolled off the Kenosha assembly line on
June 25 1957. There were no ceremonies, because at that point there was still hope of continuing the Hudson and Nash names into the 1958 model year on the Rambler chassis as deluxe, longer-wheelbase senior models. One major trade magazine said that rumors of discontinuance were false and that the 1958 Hudsons and Nashes "would be big and smart".
Factory styling photographs show designs for a 1958 Hudson (and Nash) line based on a longer-wheelbase 1958 Rambler. Front-end prototype photos show separate Hudson and Nash styling themes.
AMC President
George W. Romney came to the conclusion that neither Hudson nor Nash brand names had as much positive market recognition as the successful
Rambler. The decision to retire the Hudson (and Nash) brand names came so quickly that preproduction photographs of the eventual 1958 Rambler Ambassador show both Nash and Hudson badged and trimmed versions of the car.
Eventually, however, something close to the Hudson design was chosen for the 1958 Rambler Ambassador. Hudson fans will note the triangular grille guard and 1957-like fender "
gun sights" and the fast-selling 1958 Rambler Customs wore 1957 Hudson-styled front-fender trim.
Today
The last Hudson dealership in the world was Miller Motors in
Ypsilanti, MI. It is now the
Ypsilanti Automotive Heritage Museum, part of the Motor Cities Automotive National Heritage Area. A fine collection of restored Hudsons, including the original
Fabulous Hudson Hornet, and other area production cars can be found at the museum.
AMC Hornet
In 1970,
American Motors Corporation (AMC) revived the "Hornet" model name for its new series of compact cars (the
AMC Hornet). AMC was later bought out by
Chrysler Corporation, who are considering reintroducing the Hornet name in the Dodge production line (See:
Dodge Hornet and official Dodge information
(External Link)).
Cultural references
Further Information
Get more info on 'Hudson Motor Car Company'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://hudson_motor_car_company.totallyexplained.com">Hudson Motor Car Company Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
